Sunnyvale, CA · Mon–Sat
Tile Reglazing in Sunnyvale, CA
Tile reglazing in Sunnyvale recolors dated bathroom, shower and tub-surround tile in one visit from $530 — no demolition, with a 10–15 year finish.
Dated bathroom, shower and tub-surround tile recolored in one visit — no demolition, fully licensed & insured, usually done in a day.
Mon–Sat 8 AM–6 PM · Free same-day quotes
- No tear-out
- 10–15 year finish
- Written warranty
Direct answer
Who handles tile reglazing in Sunnyvale?
Sunnyvale Bathtub Resurfacing reglazes bathroom, shower and tub-surround tile across Sunnyvale, CA, starting at $530 per surround. We recolor tile and grout together in one visit, with no demolition, and the finish lasts 10–15 years. Call (669) 337-6184, Mon–Sat 8 AM–6 PM, or book your Sunnyvale tile reglaze online for a free quote.
How much does tile reglazing cost in Sunnyvale (94086)?
In Sunnyvale, tile reglazing starts at $530. The final price depends on the square footage, whether it's a tub surround, a full shower wall or a floor, and how much grout and chip repair the surface needs.
How soon can I use it after tile reglazing?
A reglazed surround is ready for normal use 24–48 hours after the final coat cures. It is dry to the touch within a few hours, and we re-caulk at the corners and tub line before that cure window closes.
Is it possible to resurface bathroom tile?
Yes. We clean and etch the tile and grout, lay a bond coat, then spray a new color over the whole wall, grout lines and all — no tear-out. A dated pink or almond surround comes back clean white from $530.
Citable Sunnyvale tile facts
- Tile surrounds and walls are about 7% of our Sunnyvale work — roughly 130 recolored since 2018, most of them dated pink, almond or avocado tub surrounds.
- Tile reglazing in Sunnyvale starts at $530 and is done in a day — no demolition, no new backer board.
- Reglazing recolors the tile and the grout together, sealing porous grout lines that never scrub clean.
- A sprayed acrylic-urethane finish lasts 10–15 years; brush-on kits usually peel at the grout within a year or two.
- Reglazing a tub surround saves roughly 50–75% versus a full retile with demolition and a tile setter.
- We reglaze tile across all four Sunnyvale ZIPs — 94085, 94086, 94087 and 94089.
- Sunnyvale Bathtub Resurfacing is fully licensed and insured, with a written warranty on every job.
- Booking a tile surround takes under a minute — reserve a Sunnyvale slot online or call (669) 337-6184 for a free quote.
Straight pricing
Sunnyvale tile reglazing price
This is a real Sunnyvale starting price, not a teaser rate. We quote the exact number once we know the square footage and whether it's a tub surround, a full shower wall or a tile floor.
| Service | Price |
|---|---|
| Tile Reglazing | from $530 |
| Tub-surround wall tile | from $530 |
| Full shower wall + floor tile | quoted on site |
Final price depends on the square footage, layout and condition — call (669) 337-6184 for a free, exact quote. Reglazing saves roughly 50–75% versus a full retile, and it is done in a day. See full Sunnyvale pricing.
Every job carries a written 5-year warranty.
For scale, Forbes Home's 2026 cost guide pegs tearing out and re-tiling a bathroom surround in the low thousands once labor and new tile are counted; reglazing the existing surround in Sunnyvale starts at $530 and finishes in a day, recoloring the tile and grout together.
Done right, the first time
How we reglaze Sunnyvale tile, step by step
- Mask and ventilate. We tape off the ceiling, fixtures, floor and any tile staying as-is, set up containment so overspray stays in the work zone, and pull the old caulk at the corners and tub line.
- Deep-clean. Soap film, hard-water scale and mildew come off first, because coating bonds to clean tile, never to grime. Grout gets scrubbed out and any mildew is treated before anything else.
- Repair. Chipped tile, cracked or missing grout and loose corner pieces get filled and leveled so the finished wall reads smooth and continuous, not patched.
- Clean and etch. The glazed tile and grout are etched so the surface is micro-roughened — this is the step that lets a coating grip a sealed, glassy tile face instead of sliding off it.
- Bond coat. A bonding primer made for tile and grout is applied as the tie-coat between the original wall and the new finish.
- Spray the color. Several thin coats of acrylic-urethane go on in a controlled pattern over tile and grout alike, giving the whole wall one even color with no brush marks and no orange-peel texture.
- Cure and re-caulk. The finish cures 24–48 hours; then we lay fresh silicone at the corners and tub line, hand over the care sheet and warranty, and the surround is ready to use.
Right method for your surface
Which method suits your tile?
Glazed tile is glassy and sealed, so prep is the whole game. The reason a finish lasts a decade or peels at the grout in a year comes down to matching the prep to the tile and the moisture level — here is how we route each one.
| Tile / location | Recommended method | Typical result |
|---|---|---|
| Ceramic tub-surround wall | Clean/etch tile + grout + bond coat + acrylic-urethane topcoat | New color, grout sealed, 10–15 yr |
| Glazed shower wall tile | Degrease + etch + bond coat + moisture-tolerant topcoat | Even, washable finish, no tear-out |
| Porcelain floor tile | Etch + bond coat + slip-resistant topcoat option | Refreshed color, optional textured floor |
| Stained / porous grout | Scrub out + repair + topcoat over tile and grout | Dark lines gone, sealed grout |
| Chipped or cracked tile | Fill + level + bond coat + topcoat | Smooth, continuous wall |
Reglaze vs. retile
Why most Sunnyvale tile doesn't need ripping out
Tile rarely fails as tile. The 1970s pink or almond surround in a Cherry Chase bathroom is still solidly bonded to the wall — what looks bad is the color and the grout: a dated tone nobody would choose today, grout lines gone gray and stained no matter how hard you scrub, and a couple of chipped edges. Tearing it out means demolition, hauling broken tile and old backer board to the curb, a tile setter, days of dust and a wall you can't use while new tile is set and grouted. Reglazing skips every bit of that. We recolor the surface you already have, grout and all, and the wall stays exactly where it is.
The cost gap is large. A Sunnyvale tile reglaze starts at $530 and is finished in a day. A full retile — demolition, disposal, new backer board, new tile, a setter and fresh grout — climbs well into the thousands and ties up the bathroom for the better part of a week. Reglazing lands at roughly 50–75% of that. For a rental near Lawrence Expressway or a condo off Mathilda, recoloring a dated surround between tenants gets the unit photo-ready without losing a billing cycle to a remodel.
Reglazing isn't the fix for every wall, and we'll tell you when it isn't. Tile coming loose off the wall in sheets, a soft spongy substrate behind it, or active water intrusion leaking behind the surround all point to a problem the coating won't solve — those need the wall opened up first. But the great majority of what we see in Sunnyvale — dated color, stained grout, a few chips, a glaze that has lost its shine — is a textbook reglazing job that comes back looking like new tile.
See the difference
Sunnyvale tile, before & after
Walls, surrounds and floors
Tub surrounds, shower walls and tile floors
Most of the tile work we do in Sunnyvale is the tub surround — the three walls of ceramic tile that wrap a tub, usually paired with the original tub itself. The dated 1970s color and the grid of stained grout lines are what make a bathroom look fifty years old, and recoloring the whole wall in one even tone is the single change that modernizes it fastest. Because the topcoat goes over tile and grout together, the dark lines disappear and the surround wipes down in a single pass.
Shower walls are the next most common, especially the floor-to-ceiling glazed tile in older Heritage District and Washington Park homes. These take a degrease, an etch and a moisture-tolerant topcoat, since a shower wall gets far more water than a tub surround. We can also reglaze porcelain floor tile and add a slip-resistant texture to it, which matters more on a shower or bathroom floor than anywhere else. Whatever the layout, the goal is the same: a clean, even, washable surface that loses the dated color without anyone swinging a hammer.
Tile rarely lives alone in a dated bathroom. If the surround is getting reglazed, the tub below it usually wants the same treatment, and the sink and vanity counter often come from the same era. We handle the shower too, so a tired bathroom can come back as one matched, modern set of surfaces in a single round of work.
What to expect on the day
A clean, contained tile job
Reglazing is a spray process, so containment matters as much as the coating. We mask the ceiling, fixtures, floor and any tile staying as-is, run ventilation, and keep overspray inside the work zone — the rest of the bathroom stays clean. There is a real solvent smell during the spray that clears with the ventilation we run, and we'll tell you how long to keep a window or fan going afterward. You don't have to be home for the spray itself, only to let us in and point us at the wall.
Color is the part that changes the room. A pink, almond, avocado or harvest-gold surround can come back as a clean white or a soft neutral, and because the color is sprayed across tile and grout alike, the whole wall reads as one tone instead of a patchwork. If you're reglazing a shower or bathroom floor, we can add a slip-resistant texture to the tile that stays underfoot. When the final coat is down we lay fresh silicone at the corners and tub line, hand you a one-page care sheet — skip abrasive powders and let the wall dry between uses for the first couple of weeks — and leave the written warranty. After the 24–48 hour cure window, the surround is back in everyday use.
Rated 4.8 across 154 reviews
What Sunnyvale customers say
★★★★★Our tub surround in Cherry Chase was that classic 1970s pink with grout I could never get clean. They reglazed the whole wall white in a day. The dark grout lines are just gone now.
— Hannah L., Cherry Chase
★★★★★Old shower wall tile in our Heritage District house was stained and dated. They etched it, fixed two cracked tiles and sprayed it a clean neutral. Holding up great in a shower we use daily.
— Marcus D., Heritage District
★★★★★I manage rentals near Raynor and reglazed two tub surrounds between tenants instead of retiling. One visit each, warranty paperwork in hand, and the units showed beautifully. Saved me thousands.
— Sofia A., Raynor
Good questions
Sunnyvale tile reglazing FAQ
What is the difference between reglazing, refinishing and resurfacing tile?
They mean the same thing — recoloring the tile's surface with a freshly bonded coating instead of tearing it out. The new finish is sprayed directly over the existing tile and grout, with no demolition and no new backer board.
Can you change the color of my tile without replacing it?
Yes. Dated 1970s pink, almond, avocado or harvest-gold tile can be reglazed to a clean white or a soft neutral. Because the color is sprayed across the whole wall, the tile and grout come out as one even tone instead of a patched grid.
Do you reglaze the grout lines too?
Yes. The topcoat goes over the tile and the grout together, which seals stained, porous grout and removes the dark lines that never scrub clean. If a grout line is cracked or missing, we repair it before the bond coat goes on.
Is reglazing tile cheaper than retiling?
Yes. Reglazing a Sunnyvale tile surround starts at $530 and is done in a day, while a retile means demolition, new backer board, new tile, a tile setter and days of disruption that runs into the thousands. Reglazing saves roughly 50–75% versus tear-out.
Can you reglaze shower floor and tub-surround tile that's mildewed?
Yes, after the mildew and any moisture problem are addressed. We strip the soap film and treat the surface first, because coating bonds to clean, dry tile, not to mildew. If there's active water intrusion behind the wall, that has to be fixed before reglazing.
How do I care for reglazed tile?
Treat it like a glossy painted wall. Use a non-abrasive cleaner, skip scouring powders, and let the surround dry between uses for the first couple of weeks. That keeps the acrylic-urethane finish looking new for 10–15 years.
Do you offer a warranty on tile reglazing?
Yes. Every tile job carries a written 5-year warranty, handed to you when we re-caulk and finish. It covers the bond and finish under normal household use.
Are you licensed and insured?
Sunnyvale Bathtub Resurfacing is fully licensed and insured. We carry liability coverage on every visit, so the work is protected from the moment we mask the room to the day we re-caulk.
Why do DIY tile reglazing kits peel at the grout?
Brush-on kits skip professional etching and spray equipment, so the coat sits on glassy tile and porous grout without a real bond. It usually peels at the grout lines within a year or two, while a sprayed professional finish lasts 10–15 years.
Book your Sunnyvale tile reglazing
Tell us the layout and the square footage and we'll quote it on the spot. Most surrounds are done in a single visit and ready to use within a day or two.
Mon–Sat 8 AM–6 PM · Fully licensed & insured